294184-0170 — Denso Feed Pump Cover (HP3 / HP4 Series) — Professional Product Detail

294184-0170 is a replacement feed-pump cover (sometimes marketed as a feed-pump lid or housing cap) used on Denso HP3/HP4 transfer/feeding pumps. Though small, this cover plays a critical role in maintaining internal pump geometry, sealing oil/fuel passages and preserving rotor alignment - all of which directly affect feed efficiency, pressure rise and long-term pump reliability.

 

 

In HP3/HP4 style systems the feed rotor and internal gears rely on accurately machined covers to retain correct clearances and support journal bearings. A worn, corroded or incorrect cover can cause increased internal leakage, cavitation, noisy operation, and ultimately poor pressure build at the high-pressure stage. Replacing the feed pump cover is therefore a common, economical repair when the pump housing and internals remain serviceable.

 

 

Fit-for-purpose geometry: Machined to OEM dimensions to preserve rotor-to-housing clearances and distributor alignment. 

Typically produced from hardened/case-ground steel or high-grade aluminium alloy with corrosion-resistant finishes to resist fuel and environmental attack. Vendor specs vary; always confirm material with supplier. 

OEM cross-reference:294184-0170 and listed by multiple distributors as a direct-fit feed pump cover for HP3/HP4 pumps. 

Reputable sellers provide part stamping, batch marking and short QC reports on request - valuable for fleet procurement.

 

 

This cover is most commonly used on Denso HP3/HP4 feed pumps fitted to a wide range of light commercial, agricultural and construction engines (cross-reference by pump tag is mandatory). Compatibility lists vary by market - always verify the pump's stamped number and rotation before purchase to prevent misfits.

 

 

Measure distributor bore roundness and journal wear; reject cores where scoring or ovality exceeds service limits - a new cover won't cure a damaged housing. 

Use lint-free wipes and particle-controlled benches; particulate contamination is a leading cause of rapid re-failure.

Confirm the cover stamp (294184-0170) and pump rotation or you risk incorrect clearances or wrong rotor fit. 

Use light assembly lubricant on journals and follow OEM torque procedures for fasteners.

After reassembly, validate feed flow and absence of unusual noise on a calibrated bench before refit. Record flow sheets for traceability and warranty.

 

 

Prefer suppliers who provide part-stamp photos, batch codes and a basic QC checklist (diameter, finish). This reduces counterfeit and mismatch risk. 

If buying remotely, send a clear photo of the pump tag or existing cover to the seller - many covers look similar but have different internal profiles. 

Many aftermarket distributors offer short warranties (3–12 months) and fast shipping for common feed parts. Plan lead times for fleet repairs.

 

 

Persistent cavitation noise or whining from the feed pump.

Evidence of internal leakage, reduced feed flow or slow pressure build during crank.

Visible wear, corrosion or damaged threads on the cover at teardown.
If these signs appear and the rotor/gear set is otherwise serviceable, installing a verified 294184-0170 cover is often the cost-effective corrective action.

 

 

294184-0170 feed pump cover is a compact but essential component for Denso HP3/HP4 feed pumps. Sourced with correct stamping and batch traceability, and fitted after careful core inspection and bench testing, this part returns correct feed geometry, reduces cavitation risk, and helps pumps deliver reliable pressure build - a smart, economical choice for professional workshops and fleet reman programs.

 

 

We're here to make your order process worry-free - choose the payment method that works best for you!

 

 

Popularne Tagi: 294184-0170 — denso feed pump cover (hp3 / hp4 series) — professional product detail, China 294184-0170 — denso feed pump cover (hp3 / hp4 series) — professional product detail manufacturers, suppliers, factory